For portability, compact storage, and convenience, no automotive lift on the market today compares to the Patented MaxJax Portable Two Post Lifting System by Dannmar. This portable two post lift is perfect for low-clearance ceilings and home garages. Need a quick oil change? Don’t have the room for bulky four post and two post lifts? Need to be able to use vehicles lanes when not working on your vehicles? Well need no further because the MaxJax Lift gives you all the convenience of a regular two post lift, but without permanently taking up a vehicle lane.
Standard package includes:
(1) Set MaxJax columns and adjustable arm assemblies
Standard accessory kit including (2) hoses, (4) rubber contact pads, (4) 3″ stackable adapters, (10) standard concrete wedge anchors, (1) set quick-connect fittings, and (1) set miscellaneous fasteners/bolts.
(1) 110-volt AC power unit
(1) Mobile power unit cart
Deluxe package also includes:
(1) Dannmar 8 gallon portable oil drain
(1) Dannmar rolling work seat
NOTE: The MaxJax™ is protected by one ormore patents or claims of patents in the U.S. and elsewhere. This is provided to satisfy the virtual patent marking provisions of various jurisdictions, including the virtual patent marking provisions of the America Invents Act, as codified in 35 U.S.C. § 287(a).
THIS PRODUCT IS CURRENTLY OUT OF STOCK. PLEASE CONTACT US FOR MORE DETAILS
It’s the features you get that set the MaxJax apart from the rest. Every MaxJax unit is loaded with the right features that make it the best choice when looking for a new auto lift. Read through the long list of features this car lift has to offer and you’ll easily come to the conclusion that the MaxJax is no ordinary garage lift.
Mobile power unit cart
Clear under-car access
- From stowed to go in less than 15-minutes
Adjustable lifting arms & stackable adapters
Automatic arm restraints
Maintenance-free load bearings
Dual Direct-Drive technology
Solid steel safety lock bars
Wide or narrow installation
Industrial-grade hydraulic cylinders
Durable powder coat finish
Lifting Capacity*: 6,000 Lbs. / 2727 Kg.
*Max Capacity / Front Axle: 3,000 Lbs. / 1364 Kg.*Max Capacity / Rear Axle: 3,000 Lbs. / 1364 Kg.
Max Load per Arm: 1,500 Lbs. / 682 Kg.
A – Height Overall: (*) 89″ / 2261 mm.
B – Height of Column: 64″ / 1626 mm.
C – Width (Outside of Base Plate): 105″ – 125″ / 2667 mm. – 3175 mm.
D – Arm Reach (Min.): 24″ / 610 mm.
E – Arm Reach (Max.): 44″ / 1117.5 mm.
F – Min. Pad Height: 3.5″ / 89 mm.
G – Max Lift Height (Pad only): 45″ / 1143 mm.
H – Max Lift Height (With 3″ Adapter): 48″ / 1219 mm.
Motor: (**) 110-220 VAC / 50-60 Hz. 1Ph.
Length of Hose(s): 156″ / 3962 mm.
Time of full Rise: 30-Seconds
Individual Column Weight: 300 Lbs. / 136 Kg.
Shipping Weight: 880 Lbs. / 399 Kg.
Shipping Dimensions: 14″ x 64″ x 40″ / 356 mm. x 1626 mm. x 1016 mm.
* To top of cylinder when extended to max rise.
** Special voltages available upon request.
Specifications above are subject to change without notice, it is best to contact a Dannmar sales representative to confirm specifications before purchasing.
Floorplan & Baseplate
Wide or narrow installation is possible – the MaxJax™ auto lift can be installed at a width that suits the vehicles you will be raising. You may even choose to install additional anchors at varied column positions for adaptability to multiple vehicle configurations. The baseplate measurements should be used as a reference only.
Anchor Bolt Stress Analysis
Just how strong are the anchor bolts used for the MaxJax™? Here, we’ll tell you exactly. In an effort to show just how safe the anchor bolts are when properly installed, our engineers performed stress analysis tests on just the three back anchors. Although we recommend using all five anchor bolts, we wanted to make sure there was no chance of failure when properly installed in concrete.
Analysis: Base plate anchor bolts (3 on outside edge) in tension. Analysis was performed using published Allowable Stress Design (ASD) “Design of Base Plates”……”Moments of Large Effective Eccentricities” formulas and procedures.
fp = 0.7 x fc
e = M/P
f1 = fp x B x N1 / 2
A = f1+/-(f12 – (.667 x fp x B) x (PA1+M)).5 / (fpxB/3)
T = (fp x A x B / 2) – P
T per bolt = T / # bolts
Safety Factor = Ultimate Bolt Strength / T per Bolt
# bolts in tension = 3
Anchor Bolt Ultimate Strength = 12,580 lbs. PD58, 5/8″ Wej-It Drop in Anchor, installed in 3000psi concrete per manufacturer’s instructions.
Compressive Load = 3383 lbs. (3000 lbs. lifting + 383 lbs. lift assembly weight)
Moment = 124598 in-lb (per ALI B-4 lift diagram arm extension at rated load)
Moment = 138549 in-lb (with fully extended arms)
Fc = 3000psi (Strength of concrete)
Tension stress per bolt = 2,838 lb tension, loaded per ALI B-1 diagram.
Tension stress per bolt = 3,238 lb tension, loaded per Arms Fully Extended.
Safety Factor = 443% (based on ALI B-1 arm extension)
Safety Factor = 389% (based on fully extended arms perpendicular to the lift)